手柄
DualSense Edge Test: Stick Drift and Buttons
The Edge's sticks are replaceable modules, so measuring drift tells you whether a swap is due. Start with the drift test above.
本指南尚未翻译，暂以英文显示。
用数据线或蓝牙连接手柄，然后按任意键。浏览器只有在按下按键后才会显示手柄。
优先检查
常见问题
Stick module wear
Measure drift on each stick. If one drifts and the other doesn't, a module swap usually fixes it.
Back buttons
Back buttons may show up as the buttons they're assigned to in the active profile, rather than as separate inputs.
Trigger stops
Short trigger stops cap analog travel; that's by design, not a fault. Switch them off to test full travel.
提示
- Test again after swapping a stick module to confirm the new one is centred.
已核实信息
我们只列出能通过官方来源确认的规格。此设备暂无此类信息，因此上方测试测量的是浏览器实际检测到的数据。
TestLuma 是独立网站。品牌和产品名称归其各自所有者所有，仅用于识别设备。